然後刷機用
Firmware recovery using Windows 7
This section is based my understanding of ipTIME web site generic firmware recovery instructions for (all?) ipTIME routers using Google translate.
After a failed firmware upgrade, the power LED will flash On and Off on boot up.
Download several TOTOLINK and ipTIME firmwares to C:\
Install TFTP Client: Control Panel -> Uninstall a program -> Turn Windows features on or off -> tick TFTP Client -> OK
Set static IP 192.168.0.2: Control Panel -> Network and Internet -> Network and Sharing Center -> Change adapter settings -> right click Local Area Connection -> Properties -> Internet Protocol Version 4 -> Properties -> set static IP address as 192.168.0.2 and subnet mask as 255.255.255.0 -> OK
Turn off any firewall or anti-virus on Windows
TFTP upload: Windows Start -> type “cmd”. In command prompt, type “cd \”, then type “tftp -i 192.168.0.1 put firmware.bin” where firmware.bin is the firmware downloaded previously. If your unit is manufactured with TOTOLINK firmware, try the TOTOLINK firmware first. If you bought it in Korea, try the ipTIME firmware first.
After “Transfer successful” is printed, wait for 5 minutes for the firmware to be recovered.
If it does not work, retry with a different firmware